Code-blue TOOLVOX X3 Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
Code Blue
259 Hedcor Street
Holland, MI 49423 USA
800.205.7186
www.codeblue.com GU-154-F
page 5 of 132
ToolVox® X3
Administrator Guide
3 Configuring Server Settings
Warning: Advanced knowledge of the ToolVox system is required before making any changes other
than network settings to the system. Changing settings other than the network settings may result
in complete system failure. Hourly support packages are available and require remote access to the
system via remote desktop control.
TheToolVoxX3hastheIPcongurationsettoDHCPbydefault.Whilefacingthebackofthe
ToolVoxX3server,theNIContheleftiseth0andtheNIContherightiseth1.NICeth0istheonly
interfacethatisactivatedatboot.NICeth1wouldneedtobeactivatedinWebmin,ifitisneeded.
AuseraccountwasalsoaddedtorunthefollowingfromtheCLIforthosefamiliarwithLinux
platforms:
TherearemultiplemethodsforloggingintotheToolVoxserver.
Initiallyyoumayjustwantakeyboardandmonitordirectlypluggedintotheserver.Youcanthen
congurethenetworksettingsusingCLIcommandslistedbelow.OnceyouknowtheIPaddressof
theserveryoucanconnectviaSSHoruseawebbrowserandentertheWebminsideoftheserver
toeditnetworksettings.Youdonotneedtodobothmethods.
Configuration of Network Settings Via Direct Connect and
SSH commands:
ThisisthelogininformationfortheuseraccountontheToolvoxsystems:
Login:  cbadmin
Password: CodeBlue92
Thesearesomeofthecommoncommandsthisuserisabletorunassudo:
Ifcong (seecurrentnetworkinfo)
TheserverbydefaultisDHCPsoonceyouhaveconnectedanetworkconnectiontotheeth0port
ontherearoftheserver,itwillpullanIPaddressifDHCPisrunningonyournetwork.
IfthenetworkisnotrunningDHCP,thenrunthebelowcommandtocongureastaticIPaddress.
sudo system-cong-network (setupDynamic/StaticnetworksettingsfortheToolVox).
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 131 132

Comentarios a estos manuales

Sin comentarios