Code-blue CB 4-S SIGNATURE WALL/POLE MOUNT ENCLOSURE Manual de usuario descargar pdf (Pagina 28)

Code Blue

•

259 Hedcor Street

•

Holland, MI 49423 USA

•

800.205.7186

•

www.codeblue.com

GU-160-Cpage 28 of 45

CB 4 Series

Administrator Guide

17 S-1000/S-1050 Installation Instructions

M3159-R/BK

RED

BLACK

POSITIVE (12-24V DC or AC)

COMMON (GROUND)

YELLOW (FLASH MODE)

M3159-Y/Y

DRY CONTACT

CLOSED = "ON"

YELLOW (FLASH MODE)

CAUTION: REMOVE ALL POWER FROM UNIT BEFORE SERVICING.

ATTENTION: WHEN REPLACING A BEACON/STROBE ON THE MODEL CB 5

SERIES ONLY, MOUNTING SCREW THREADS MUST BE COATED TO PREVENT

WATER LEAKAGE INTO THE UNIT.

OPERATION

To activate the LEDs in the PRIMARY-STEADYBURN MODE, connect the BLACK and RED

wires to 12-24 volts AC or DC.

When in PRIMARY-STEADYBURN MODE, to change the LEDs to SECONDARY-FLASH MODE,

connect both YELLOW control wires together (i.e., CLOSED = ON).

PHOTOCELL FEATURE (S-1050 MODEL)

The Steadyburn Mode will be ON in dark or night ambient environments and OFF in bright or

daylight ambient environments. The S-1050 LED Beacon/Strobe has two built-in photo response

features: (a) dawn/dusk transition delay of 15-30 minutes and (b) transient light acknowledgement

delay of at least 3 minutes.

NOTE: Instructions pertain to

Model S-1000 LED Beacon/Strobe and

Model S-1050 LED Beacon/Strobe only

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 44 45

Sin comentarios

Code-blue CB 4-S SIGNATURE WALL/POLE MOUNT ENCLOSURE Manual de usuario Pagina 28